User manual

94 Chapter 6 Maintenance

Install New Stitch Wire

Feed the Stitch Wire

[61]

4 Close the folder cover..

5 Close the connecting bridge

cover.

Step Action Information

1Touch START .

3 Set the number of stitches to 6 (see ‘Job Setting for a Standard Paper

Size’ on page 15)

4 Hand-feed or print an A4 or

larger size test job..

The stitch wire loads automatically

during the stitch head cycle.

5 Check the stitch wire is

loaded.

Check that a stitch is made. If needed,

repeat the previous step.

6 Reset the number of stitches

on the touch screen.