User manual

89
Lubricate the Wire-feed Cam
Lubricate the Wire-feed Cam
Introduction
[49]
[49] Lubricate the wire-feed cam
[54]
Lubricate the wire-feed cam
[55]
A
B
C
A Nozzle for the tube of grease
B Wire-feed cam
CFeed lever
Step Action Information
1. Lift the PSQ main deck.
2. Apply 10mm of grease from the tube
between the bearing surface of the
wire-feed cam and the feed lever.
figure 49
[50]
3. Lower theOcé BLM500 main deck
4. Lower the clincher frame. Lower the Clincher Frame on
page 38
5. Close all of the covers
10mm