User manual

Clear Paper Jams

Jam in the Gathering Area

1. Open the connecting bridge cover.

2. Lift the gathering area cover.

3. Remove the jammed paper.

4. Check the belts are in the correct position. Adjust the position of the belts if

necessary. figure 28 on page 62

5. Close the gathering area cover.

6. Close the connecting bridge cover.

7. Continue the print job.

Jam in the Stitch Area

[34]

Jam in the Folder or Former Area

1. Open the folder cover.

2. Remove the jammed paper. If you cannot see the paper in the former area. (see ‘Jam

in the Trim Area’ on page 64)

3. Close the folder cover.

4. If there is paper in the gathering area, touch PURGE SET. This action clears paper

from the Océ BLM500.

5. Continue the print job.

Step Action Information

1 Open the folder cover. (see ‘Open the Folder Cover’ on

page 36)

2 Lift the clincher frame. (see ‘Lift and Lower the Clincher

Frame’ on page 37).

3 Remove the jammed paper.

[29]

Press to manually operate the

clincher.

4 Check for broken or damaged

stitches in the clincher area.

Manually operate the clincher to

clear any stitches that are jammed.

(see ‘Lift and Lower the Clincher

Frame’ on page 37)

5 Lower the clincher frame.

6 Close the folder cover.

7 If there is paper in the gathering area,

touch PURGE SET.

This action clears paper from the

Océ BLM500.

8 Continue the print job.