User manual

62 Chapter 5 Error Conditions, Problems and Solutions
Clear Paper Jams
[28]
[28] Gathering Area Belt Positions
Jam in the Bridge Infeed
1. Open the bridge infeed cover.
2. Remove the jammed paper.
3. Close the bridge infeed cover.
4. If there is paper in the gathering area, touch PURGE SET. This action clears paper
from the Océ BLM500.
5. Continue the print job.
Jam in the Connecting Bridge
1. Open the connecting bridge cover.
2. Remove the jammed paper. Do not damage or move the belts.
3. Close the connecting bridge cover.
4. If there is paper in the gathering area, touch PURGE SET. This action clears paper
from the Océ BLM500.
5. Continue the print job.