User manual

55
Error Messages
Stitch position
adjusting
The stitch position is adjusting.
This message clears when the
adjustment is complete.
STITCH TIMEOUT There is an internal error. If the
problem continues, then call
your service engineer.
TOO MANY PAGES The printer has delivered more
than 55 sheets into the gathering
area. Remove the incorrect set.
Correct the printer setting.
(see ‘Open the
Gathering Area
Cover’ on page 39)
TOUCH PAD ERROR There is a fault with the START
and STOP touch pads. If the
problem continues, then call
your service engineer.
Touch START to clear
machine
There may be some paper in the
machine. Touch START to
clear the machine before you
start a new job.
Trim axis moving The trim axis (size adjustment)
is moving. This message clears
when the adjustment is
complete.
TRIM BIN OPEN The trim bin is not fitted or is not
contacting the safety switch. Fit
the trim bin.
TRIM BLADE NOT
PARKED
The trim blade is in the wrong
position. Touch START to
reset the position.
USER STOP The user has touched the STOP
button while the machine is in
operation. Touch START to
restart the machine.
Problem Cause Solution