User manual

53
Error Messages
JAM AT FORM
ROLLER
The form roller is jammed. Open
the folder cover and remove the
jam.
(see ‘Jam in the Trim
Area’ on page 64).
JAM BEFORE
TRIMMER
There is a book jammed before
the trimmer. Clear the jam and
continue.
(see ‘Jam before the
Trimmer’ on page 64).
JAM IN
CONNECTING
BRIDGE
There is a paper jam in the
connecting bridge. Clear the jam
and continue.
(see ‘Jam in the
Connecting Bridge’ on
page 62)
JAM IN
GATHERING AREA
There is a paper jam in the
gathering area. Open the
connecting bridge cover, lift the
connecting bridge and remove
the paper jam.
(see ‘Jam in the
Gathering Area’ on
page 63)
JAM IN STACKER
AREA
There is a paper jam at the
outfeed of the machine. Remove
the jammed books and continue.
JAM IN STITCHER
AREA
There is a paper jam in the stitch
area. Open the folder cover,
remove the paper jam and
continue.
(see ‘Jam in the Stitch
Area’ on page 63)
JAM IN TRIMMER There is a book jammed in the
trimmer. Clear the jam and
continue.
(see ‘Jam in the Trim
Area’ on page 64)
MANUALLY PARK
SHUTTLE
The shuttle is not parked
correctly. Open the folder cover
and move the shuttle to the park
position. Close the folder cover.
The shuttle will reset. When the
message list is clear, continue
operation.
Manually park the
Shuttle on page 74
MISSING STITCHES The machine has detected
missed stitches. Check if the
stitch wire is jammed or if the
stitch wire spool is empty.
(see ‘Clear a Stitch
Wire Jam’ on page 67)
(see ‘Install New Stitch
Wire’ on page 90)
Problem Cause Solution