User manual

52 Chapter 5 Error Conditions, Problems and Solutions
Error Messages
ERROR IN TRIM
AREA
There is an error at the trimmer.
Check the machine for a paper or
book jam.
FLOW ERROR -
BRIDGE
There is an error at the
connecting bridge. Open the
connecting bridge cover and
check for a paper jam.
(see ‘Clear Paper
Jams’ on page 60)
FLOW ERROR -
FORMER
There is an error at the former.
Open the folder cover and
remove the book or books. If
necessary, open the main deck to
remove the book or books.
Jam in the Folder or
Former Area on
page 63
FLOW ERROR -
OUTFEED
There is an error at the outfeed.
Check the outfeed. If necessary,
remove the trim bin and open the
trim stop guard to remove the
book or books.
Jam in the Trim Area
on page 64
Fold blade axis
moving
The fold blade axis (book
thickness adjustment) is
moving. This message clears
when the adjustment is
complete.
FOLD BLADE NOT
PARKED
The fold blade is in the wrong
position. Touch START to
reset the position.
FORM CLAMP
CLOSED
The form clamp is in the wrong
position. Touch START to
reset the position.
FORM ROLLER
ERROR
The form roller is jammed. Clear
the jam and continue.
(see ‘Jam in the Trim
Area’ on page 64)
FORM ROLLER NOT
PARKED
The form roller is in the wrong
position. Touch START to
reset the position.
GATHERING AREA
COVER OPEN
Close the gathering area cover if
you need to operate the machine
online.
JAM AT BRIDGE
INFEED
There is a paper jam at the infeed
to the connecting bridge. Clear
the jam and continue.
(see ‘Clear Paper
Jams’ on page 60)
Problem Cause Solution