User manual

43
Adjust the Stacker Collection Table
Adjust the Stacker Collection Table
Introduction
The collection table must be in the correct position for the stacker to operate. The
position of the collection table depends on the finished size of the job.
[19]
[19] Collection Table Positions
[23]
When to do
■ When you start a new job
■ If the books do not stack correctly
Procedure
Insert the collection table into one of the three pairs of slots.
[24]
A
3
2
1
A Insert the collection table into one of the three pairs of slots.
Finished Book
Metric Paper Size
Metric
Dimensions
Finished Book US
Paper Size
Slot
A6 105 x 148 mm 4 1/4 x 5 1/2 inches 1
up to A5 148 x 210 mm 5 1/2 x 8 1/2 inches 2
up to A4 210 x 297 mm 8 1/2 x 11 inches 3
up to maximum
size
Printer dependent 9 3/4 x 13 1/4
inches
3