User manual

26 Chapter 3 The User Interface

The BASIC Window

Introduction

The BASIC window gives you access to frequently-changed machine settings.

Button overview

[10]

[10] The BASIC Window Buttons (1 – 2)

Button Information

PAPER SIZE Touch PAPER SIZE to enter the paper size. When the

machine is in operation, you can adjust the PAPER

SIZE by a maximum of +/- 1mm.

- PAGE DIRECTION Touch PAGE DIRECTION to change the direction of

the paper to Landscape or Portrait.

- ROTATE Touch ROTATE to set the sheet rotation ON or OFF. If

you select A4 portrait (USA: 8.5x11), ROTATE is set to

ON automatically.

- PRESETS Touch PRESET to select a standard paper size.

SET THICKNESS Use the SET THICKNESS window to define the

thickness of the set.

- THICKNESS Measure the thickness of the set before you make a book.

Touch THICKNESS and enter the value.

STITCHES Touch STITCHES to select the number of stitches.

Available options are 1-6. The machine automatically

calculates the position of the stitches according to the

size of the paper. Select 0 to turn off the stitch function.

FORM To make the square spine of the book, pressure is applied

to the spine. This process is called forming. Touch

FORM to specify the amount of spine form. To make a

good spine on heavy or coated paper, the amount of spine

form can be increased. To increase the amount of spine

form

■ Touch NUMBER to repeat the process

■ Touch PRESSURE to increase the pressure

- AUTO Touch AUTO to select the optimum amount of spine

form, according to the set thickness.