User manual

25
The Job Mimic
The Job Mimic
Introduction
The job mimic shows the current machine status.
Illustration
[6]
[6] The Job Mimic
Component - function table
[9]
No. Icon Information
1
[7]
The following items are shown
■ the size of paper
■ the format of the paper in the
gathering area
■ the broken line shows the fold line
■ the small thick lines show the stitches
■ the arrow shows the original feed
edge in the printer
2
[8]
The set thickness, in mm, is shown.
3
[9]
The number of forms is shown. If the
pressure is adjusted, the setting is shown
in brackets. A red X shows that the form
function is not active.
4
[10]
The trim setting is displayed. A red X
shows that the trim function is not active.