User manual

15
Enter the Job Settings
Job Setting for a Standard Paper Size
[5]
Job Setting for a Non-Standard Paper Size
[6]
Step Action Information
1Touch BASIC
2 Enter the paper size
and page direction
Touch PAPER SIZE > PRESETS > A3 or A4.
(USA: 11x17, 8.5x11 or 8.5x14)
The PAGE DIRECTION is PORTRAIT.
If needed, touch PAGE DIRECTION >
LANDSCAPE.
3 Enter the set
thickness.
Touch THICKNESS. Enter the measured value.
4 Enter the number of
stitches.
Touch STITCHES and enter the number of
stitches.
5Touch CLOSE.
Step Action Information
1Touch BASIC
2 Enter the paper size Touch PAPER SIZE. Enter the dimensions of the
paper.
3 Enter the page
direction
Touch PAGE DIRECTION > LANDSCAPE or
PORTRAIT.
If the PAGE DIRECTION option is not available,
the PAGE DIRECTION cannot be changed.
4 Enter the page
rotation setting
For A4 paper size, the normal setting for ROTATE
is ON. Rotation lets the printer operate at optimum
speed.
Touch ROTATE to turn the sheet rotation ON or
OFF. Always select the page direction before you
change the rotate setting.
5 Enter the set
thickness.
Touch THICKNESS. Enter the measured value.
6 Enter the number of
stitches.
Touch STITCHES and enter the number of stitches.
7 Enter the spine form
setting
The spine form setting is automatic, according to
the THICKNESS setting. If needed, the setting can
be changed. See 'FORM' in table 10 on page 26