Specifications

5151515151
4. Locate the filter cap. Turn the filter cap counterclockwise until the cap can be removed from the filter standpipe. 5. Remove and clean filter cartridges. 6. Remove the existing FreshWater
Ag
+
®
Silver Ion Purifier.
7. Install the new FreshWater
Ag
+
Silver Ion Purifier into the filter standpipe. Do not force the FreshWater
Ag
+
Silver Ion Purifier down
into the filter standpipe.
8. Reinstall the cleaned filter cartridge. 9. Replace and secure the filter cap. 10. Replace the filter compartment cover. 11. Fold the cover back into place. WARNING: Never use the spa with the filter cartridge or filter standpipe removed! si l v e r io n s qu e s t i o n s a n d an s W e r s Question: How are the silver ions actually added to the water? Answer: The silver ion cartridge contains ceramic beads that are infused with silver. By placing the cartridge in the filter standpipe, it is subjected to the flow of water created by the jet pump’s operation. The flowing water, through a chemical erosion process, carries with it the silver ions necessary to add a sanitizing residual to the spa water. Question: What happens if I do not add the weekly non-chlorine oxidizer treatment? Answer: The contaminants in the water may coat the silver ion cartridge’s ceramic beads, blocking the silver ions’ release into the water. When this occurs, there will be no residual of silver ions present in the water, eliminating them from the sanitizing process. Question: How often should the FreshWater
Ag
+
Silver ion purifier cartridge be replaced?
Answer: The cartridge must be replaced every four months. Please refer to the instructions provided with each FreshWater
Ag
+
silver
ion purifier cartridge. Question: Why can’t I use bromine or biguanides instead of MPS or chlorine? Answer: Bromine and biguanides will chemically react with the sanitizing action of the silver ions. This will eliminate their beneficial sanitizing effect.