Specifications

3939393939
CARE OF THE SPA PILLOW The spa pillows will provide years of comfort if treated with care. The pillows have been positioned above the water level in order to minimize the bleaching effects of chlorinated water and other spa water chemicals. To extend their life, whenever the spa shell is being cleaned, the spa pillows should be removed and cleaned. Remove body oils with a mild soap and water solution. ALWAYS rinse off the spa pillows thoroughly to remove any soap residue. The pillows may be conditioned with Hot Spring
®
Cover Shield after cleaning.
If the spa is not going to be used for a long period of time (that is, during a vacation or if the spa is to be winterized), or when the spa water is being super-chlorinated, the spa pillows should be removed until the next use of the spa. To remove and replace the spa pillow:
1. Carefully lift the pillow away from the spa, gripping the top center of the pillow. 2. Continue lifting until the top pillow retainer is released from the pillow. 3. Pull and roll the top of the pillow towards the bottom to release the bottom retainer from the pillow. 4. To reinstall the spa pillow, carefully align the lower retainer on the spa with the lower receiving hole on the pillow. Bend the pillow
slightly to allow the lower retainer to slip over the receiving hole on the pillow.
5. Keeping the pillow slightly bent, slide the upper retainer into the upper receiving hole of the pillow. 6. After the second pillow retainer is in place, press the pillow down into the recess in the spa shell. VacatIon caRe InstRUctIons If you plan to be away, follow these instructions to ensure the water quality of your spa is maintained: sh o r t ti m e Pe r i o d s (3-5 da y s ): 1. Adjust the Total Alkalinity, Calcium Hardness and pH by following the instructions outlined in the Water Quality and Maintenance section. 2. Sanitize the water by following the shock procedures also listed in the Water Quality section. Make sure the air control is turned to
the OFF position.
3. Lock your cover in place using the cover-locks. 4. Upon your return, sanitize the water by following the shock procedures, and balance the pH.