Specifications

38
38383838
2. Rinse off the underside of the cover with water only (do not use soap), and wipe it clean with a dry rag. 3. To condition the cover after cleaning, apply a thin film of Hot Spring
®
FreshWater
®
Cover Shield to the vinyl surface and buff to a
high luster.
ou t D o o r s p a u s e : 1. With a garden hose, spray the cover to loosen and rinse away dirt or debris. 2. Using a large sponge and/or a soft bristle brush, and using a very mild soap solution (1 teaspoon dishwashing liquid with 2 gallons
or 8 liters of warm water) or baking soda (sodium bicarbonate), scrub the vinyl top in a circular motion. Do not let the vinyl dry with a soap film on it before it can be rinsed clean.
3. Scrub the cover’s perimeter and side flaps. Rinse clean with water only. 4. Rinse off the underside of the cover with water only (do not use soap), and wipe it clean with a dry rag. 5. To condition the cover after cleaning, apply a thin film of Cover Shield to the vinyl surface and buff to a high luster. SERVICE NOTE: To remove tree sap, use cigarette lighter fluid (not charcoal lighter fluid). Use sparingly, and rinse with a saddle
soap solution immediately afterwards, then wipe dry.
im p o r t a n t r e m i n D e r s :
•DO lock cover straps to secure the cover when the spa is not in use.
•DO NOT drag or lift the spa cover using either the flaps or the tie-down straps. •DO NOT walk, stand, sit, or place heavy objects on the cover. •DO NOT place any metal or heat transferring object on the cover or place any type of plastic tarp or drop cloth over the cover as
this may result in a melted foam core, which would not be covered under the warranty.
•DO NOT use any lifting mechanisms, chemicals or cleaners except those recommended by Watkins Manufacturing Corporation
or its Authorized Sales and Service Dealer.
IMPORTANT: Whenever the spa is not in use, it is essential that the cover be in place. When filled, this ensures effective
temperature maintenance and economical operation. When empty, this prevents potential damage to the surface finish of the interior walls. In outdoor use, this can result from the excessive heat of the sun. This type of damage is specifically excluded from warranty coverage.