Specifications
32
32
SPA CONTROL PANEL
A. JETS BUTTON: Use the JETS button to activate the jet pump. Pushing the
JETS button once will activate the jet pump on low
speed. The low speed should be used as a filtration
cycle rather than as an operation cycle. Pushing it a
second time will activate the high speed mode of the jet
pump. A third push will deactivate the jet pump.
NOTE: The Moto-Massage
®
jet (available on the TX spa) will not function
properly with the jet pump on low speed.
The jet icon in the display will illuminate whenever the jet pump is
activated (either high or low speed) using the JETS button.
B. LIGHT BUTTON: The Solana
®
spa is equipped with a blue LED spa light.
Push the LIGHT button to turn it on. Push it a second
time to turn the light to a medium light intensity, a
third time for a low intensity and a fourth time will turn
it off. When the light is activated, the light icon in the
display will illuminate. For enhanced spa enjoyment, an
optional six color wheel light feature is available to create your desired ambiance.
C. SPLENDORS
®
LED LIGHTING (OPTIONAL):
The Splendors LED lighting system allows you to brighten up your spa experience through different multicolor lights: red, blue
white, purple, amber, and aqua. You can choose one stationary color or you can cycle through all the colors with the automatic color
wheel.
To install Splendors LED lights, simply remove the light reflector by rotating counterclockwise and pull the factory installed light
board out. Install the new light fixture and reinstall the light reflector by rotating clockwise to complete the installation.
To activate, press the SET button followed by the LIGHT button. To select a specific color, push the LIGHT button (if within
5 seconds) while the desired color is displayed. If 5 seconds have passed, after color wheel activation, you will need to press
SET followed by LIGHT to select the specific color. The Splendors LED lighting option is a great way to personoalize your spa
experience.
323232
Display
Filter Cycle
Jets Button
Button
Temperature
Down
Temperature
Up
Set
Button
Sleep
Temp
Ready
Filter Cycle
Filter Cycle
SET
READY
F1
F2
READY
READY
READY
READY
READY
READY
READY
F1
SET
READY
F1
F2
SET
F1
F2
SET
READY
F1
F2
READY
SET
READY
F1
F2
READY
READY
READY
READY
READY
READY
READY
F1
SET
READY
F1
F2
SET
F1
F2
SET
READY
F1
F2
READY