Specifications
29
Temp Up (
▲
) & Temp Down (
▼
) buttons together for 3 seconds again.
LOCKING FEATURES
The locking features, TEMPERATURE LOCK and SPA LOCK, are enabled from the control panel by a specific combination of
buttons. Once enabled, a lock will remain active until the specific button combination is applied to disable the lock. Even if power is
disconnected from the spa and soon thereafter reapplied (such as a power outage), the lock will remain in place.
sP a lo c k
The Spa Lock feature deactivates all of the functions of the control panel, it is generally used to prevent unwanted
use of the spa.
To activate the Spa Lock, press SET button. When the SET icon flashes press the Temp Down (
▼
) button. Do not
press any other button on the control panel until the SET icon stops flashing. SLOC is then displayed.
To deactivate the Spa Lock, press SET button. When the SET icon flashes press the Temp Down (
▼
) button. Do not
press any other button on the control panel until the SET icon stops flashing. SLOC is no longer displayed.
te m P e r a t u r e lo c k
The Temperature Lock feature deactivates the temperature control function from the control panel. All other
functions on the control panel will operate normally. Temperature Lock is most often used by those who do not
want others to change the set temperature of the spa water.
To activate the Temperature Lock, Press SET button. When the SET icon flashes press the Temp Up (
▲
) button. Do
not press any other button on the control panel until the SET icon stops flashing. TLOC is then displayed. To deactivate the Spa Lock,
press SET button. When the SET icon flashes press the Temp Up (
▲
) button. Do not press any other button on the control panel until
the SET icon stops flashing. TLOC is no longer displayed.
mo t o -ma s s a g e
®
je t
The Moto-Massage jet automatically travels up and down in a sweeping motion, simulating the natural stroking effects of a manual
massage. The intensity and speed of the Moto-Massage jet may be adjusted by turning its Comfort Control
®
lever. The Moto-Massage
jet has been factory adjusted to provide maximum hydromassage, and to achieve full vertical travel with its Comfort Control lever in
the full air volume position. Should the Moto-Massage
®
jet not achieve full vertical travel and the problem is not a closed air control
valve, a pump set on low-speed, or a clogged filter cartridge, then your Solana
®
Spa Service Center should be contacted.
SET
READY
F1
F2
READY
READY
READY
READY
READY
READY
READY
F1
SET
READY
F1
F2
SET
F1
F2
SET
READY
F1
F2
READY
SET
READY
F1
F2
READY
READY
READY
READY
READY
READY
READY
F1
SET
READY
F1
F2
SET
F1
F2
SET
READY
F1
F2
READY