Specifications

co n v e r t e d 115 vo l t , 30 am P co n f i g u r a t i o n co n v e r s i o n i n s t r u c t i o n s NOTE: An Authorized Solana
®
Spa Technician must perform the conversion.
1. Disconnect power to the spa and access the control box. 2. Locate the program jumpers (JP1 - JP8) at the top right of the control box. 3. Using a pair of needle nose pliers, carefully remove the parked (spare) jumper. 4. Attach parked jumper to JP1 as illustrated below. A licensed electrician must install the sub-panel (available from your Solana Spa Dealer) to supply power to the spa. The sub-panel must be placed in sight of the spa, at a minimum distance of 5 feet (1.5 m) away.
15151515
NOTE: - Jumpers are located in top right corner of Control Box labeled P4 “Config Jumpers” - To Change from fahrenheit to celsius remove jumper on JP2.
2 Position Power Jumper must remain on the Terminal Block to operate 115 VAC Spa Models
Terminal Block Power Jumper
Power Jumper Position
See Wiring Illustration
115 VAC Wiring (30A Converted)
When Converting to 30 A Install Jumper on JP1