Specifications

10
101010
•Removethesixscrewcaps- Place a flat head screwdriver between the panel and the screw cap, then carefully rotate the
screwdriver to remove the screw cap.
•RemovethesixPhillipsscrews - Starting with the upper right corner of the front panel followed by the two below, then repeat
on the left side.
•Removethefrontaccesspanel- The top of the front panel is tucked behind the lip of the spa shell. Push down on the upper
right corner of the front panel (this will create a bow in the front panel) slide other hand behind the front access panel and pull
front panel away from the spa.
re p l a c e m e n t o f t h e f r o n t a c c e s s p a n e l
•Replacethefrontaccesspanel- Position the left side of the front panel at a 45° angle tucking the upper left corner of the panel
under the spa shell while aligning the end of the panel with the scribe line. Lower panel, then continue tucking the top of the
front panel under the shell moving from left to right until the entire top of the front panel is tucked under the shell.
•ReplacethesixPhillipsscrews- Align the top left hole of the front access panel with the hole behind the panel, insert a Phillips
screw and rotate twice. Align the right top hole and insert a Phillips screw and rotate twice. Insert the other four Phillips screws
into the remaining holes, then tighten all six screws.
•Replacethesixscrewcaps- Replace the screw caps by pushing the caps onto the screws using your thumb.
REMOVAL AND REPLACEMENT OF THE FRONT ACCESS PANEL
(SX SPA)
Your SX spa uses 4 screws to hold the front door panel onto the spa.
•Removethefrontdoorpanel- To remove the front door panel, loosen and remove the 4 screws holding the door panel onto the
spa, then remove door panel from spa.
•Replacethefrontdoorpanel- To replace the front door panel, place door panel against frame of spa, line up holes and attach door
panel to spa using 4 screws.
in s t a l l a t i o n no t e s :
1. If you are an owner of a condominium, town home/patio home or are a member of a homeowner’s association, contact your
representatives regarding their requirements. If you have any questions regarding zoning requirements or building codes, contact