Specifications

www.hotspring.com
www.hotspring.com
CUSTOM CABINET
CUSTOM CABINET
Gray
Earth
13
12
When attaching alternate types of siding to the custom cabinet spa, plan on using
drywall or deck screws. Be sure to use the correct-length screw applicable to the
depth of the custom exterior selected.
For example, if the siding of choice is approximately ¾-inch to 1-inch thick, it is
best to use a 2-inch screw so that the exterior siding and custom cabinet plywood
protection on the spa can be penetrated. Using the correct-length screw ensures that
the internal spa workings will not be harmed. In addition, the vertical supports (see
above) surrounding your spa can be used as attachment points for any custom exterior
siding, if needed.
►WARNING: A 2-inch screw is the maximum screw length to use. Using a longer
screw could damage the functionality of the spa and would void the spa’s warranty.
+
IMPORTANT: Be sure to discuss hardware/screw length with your landscape
contractor when planning for your custom spa siding installation.
Main control panel
If the custom exterior covers the main control
panel, the Hot Spring
®
IQ 2020
®
remote control
provides all of the same functions as the main
control panel. Also, most models have an auxiliary
control panel accessable from inside the spa that
can be used to control the lights, jets and music
system.
Cover lifters
A cover lifter allows for easy opening/closing of your spa cover. Cover lifters are
easily installed in conjunction with the SpaStone
™
product. You can also use a cover
lifter with a custom exterior covering. Just ensure that the top/bartop of the exterior
covering is designed in a way that allows for the cover, AND fits with the dimensions
of a standard cover lifter. Talk to your authorized Hot Spring
®
spa dealer for more
information regarding spa cover lifters.
Cover locks
Cover locks or some form of safety barrier are required by law. All spas must include
a locking device (typically a cover with cover locks) to ensure the safety of family, pets,
and friends. Depending on the installation, you and your landscape contractor will need
to consider a method for locking your spa cover.
+
IMPORTANT: Some form of safety barrier is required by law. If cover locks are not
feasible with your particular installation, you will need to install a gate or fence (similar
to a pool) in order to provide a barrier for your Hot Spring spa. Please check your local
building codes.
Drainage
When selecting the location for your custom exterior spa, ensure that water will not
puddle around the spa. Provide a drainage system where the water flows down and
away from the spa to an appropriate outlet or drain.
The following addresses installation considerations and provides you with information
recommendations and solutions for you and your installation team to help guide you in
the planning and installation of your customized Hot Spring
®
spa.
+
 IMPORTANT: Please refer to the Basic Spa Installation Considerations
section on page 9 for details on the location of the main control panel, equipment
compartment, drains, etc.
Custom exteriors
The custom cabinet spa is shipped with 3/4-inch, sealant-treated BCX plywood sheets
covering the inner structure, plumbing, and electrical components of the spa. For a
customized solution tailored for the Hot Spring
®
spa, select the SpaStone
™
covering,
available in two color choices from your Hot Spring dealer.
NOTE: Remember to provide access on all sides of the spa in case repairs are needed.
If you choose to create a unique siding, you may want to mount the siding on sheets of
plywood which can then be fastened to the spa exterior. Access to the spa’s internal
components would then be achieved by removing one of these custom panels. This
method would save time and expense in the event of a repair.
Another option is to use an alternate exterior covering such as faux brick, faux slate
rock, teakwood, aluminum, brushed steel, etc. to create your own custom look. The
plywood façade provides a solid surface to which custom sidings can be attached. In
addition, the vertical structure provides additional support for heavier materials (such
as flagstone) that can be attached to the side of the spa.
Custom
Cabinet
Custom
Cabinet