Specifications

www.hotspring.com
26
GENERAL SAFETY
+ IMPORTANT: It is the responsibility of the spa owner and installer to become
thoroughly familiar with the Hot Spring
®
limited warranty, the appropriate construction
methods and techniques, as well as all governing agency codes and regulations. All
builders and installers should hold current licenses for their respective professions
within the state the work is being performed.
+IMPORTANT: Because every deck and patio is constructed in a different manner
and no two design scenarios are alike, the information in this document is intended to
be used as an installation guideline.
WARNING: To ensure you will have an opportunity to use your spa soon after
delivery, it is very important that the required electrical service has been installed.
Unless otherwise stipulated by your dealer, THIS IS YOUR RESPONSIBILITY. Never let
water get into the subpanel (230v models), or into the electrical outlet to which your
spa is connected.
WARNING: Watkins Manufacturing Corporation REQUIRES THE USE OF A SUBPANEL
FOR ALL 230v INSTALLATIONS TO SUPPLY POWER AND PROTECT THE SPA.
WARNING: Removing the GFCI breakers in the subpanel at any time will result
in an unsafe spa and will void the warranty. Bypassing the GFCI breakers could result
in an unsafe spa and will void the warranty.
+ IMPORTANT: All 230v spas include a GFCI electrical subpanel; however, the
115/230v conversion models do not. If a 115/230v conversion model is purchased,
and you decide to convert your spa from 115v to 230v, be sure a qualified electrician
provides a GFCI electrical subpanel during the conversion process.
+ IMPORTANT: All electrical circuits must be installed by a qualified, licensed
electrician. If you require the services of a licensed electrician, your Hot Spring
®
dealer
should be able to suggest one for you.
+IMPORTANT: If you have questions or concerns about whether or not the main
circuit breaker box for your home has the appropriate amperage circuits (specified
in the Owner’s Manual), please contact a qualified, licensed electrician to check the
voltage levels and amperage for your home before supplying power to your spa.
+ IMPORTANT: To ensure a safe installation with regard to your spa’s power
connections, please adhere to ALL the electrical requirements provided in the Pre-
delivery instructions provided by your Hot Spring
dealer. Pre-delivery instructions can
also be found online at www.hotspring.com in the customer service section.
WARNING: To be certain that your deck can support your spa, you must know the
deck’s maximum load capacity. It is recommended that you consult a qualified building
contractor or structural engineer before you place the spa on an elevated deck. This
weight (per square foot) must not exceed the structure’s rated capacity, or serious
structural damage to the deck and/or spa could result. Please refer to your User’s
Manual for the specific filled weight of your spa.
General
Safety