Manual

When the water flow going through you system slows

significantly, it is time to clean your ceramic cartridge

only.

Cleaned

Section

The fine pores on the ceramic surface have become

blocked by various kinds of sediment. Remember-

what you find on the outside of the ceramic cartridge

is NOT passing through for your consumption.

To clean your ceramic cartridge:

1) Turn off the water valve closest to your system.

2) Flip up the black handle on your WateRx

faucet.

3) If you are also filtering water to your

refrigerator, turn off your icemaker and drain

the water from your convenience center in the

door.

4) Unthread the white canister (containing the

ceramic cartridge) from the black manifold.

The ceramic cartridge will be “snugged” up

into the manifold.

5) Pull the ceramic cartridge down from the

manifold.

6) Take the cartridge to another sink in your

home and scrape off the sediment build-up on

the ceramic with a sharp knife or Scotchbrite.

7) Rinse it off and push it back up into the

manifold with a slight twist to help the O-rings

on the nipple hold the cartridge in place.

8) Cover the ceramic cartridge with the canister

and thread back onto the manifold.

9) Turn your water back on.

Your water flow will ha

improved.

If you are cleaning your ceramic cartridge at least six times to

eight times a year, you will find that installing a WateRx prefilter

will keep you from having to clean your cartridge as frequently.