Installation guide

WaterWorks TM...... AUTOMATIC WATER CONDITIONER
SPECIFICATIONS / DIMENSIONS
MODEL WS 2000
See RatingDecal, Located On The Softener
52 / 1.0
9x40
See Rating Decal
110
8
20 - 125
120
3
RATED CAPACITY
AMOUNT OF HIGH CAPACITYRESIN (Ibs / cuft)
RESIN TANKNOMINAL SIZE (in., dia x height)
SERVICE FLOW RATE(gpm)
WATERSUPPLYMAXIMUM HARDNESS (gpg)_
WATERSUPPLYMAX. CLEAR WATERIRON (ppm)_
WATERPRESSURELIMITS (min. / max. psi)
WATERTEMPERATUREMAXIMUM (°F)
WATERSUPPLYMINIMUM FLOW RATE (gpm)
REGENERATION CYCLEFLOW RATES (gpm)
FILL (flow to brine tank)
BRINING 7
BRINE RINSEL (flow to
BACKWASH I drain)
FASTRINSE .J
50-3/8"
_9--14"-_
INLET - O_U_TL_
3-7/8"
,I--- 18_1/4" --_
41-5/8"
t
.3
.16
.12
1.8
1.8
O Determined by water analysis from a qualified water testing
laboratory.
FACTS AND FIGURES TO KEEP
Fill in the blanks below and keep this book in a safe
place so you always have these facts.
Water Softener Model No.t
Serial Number
Date Installed
Water Hardness Grains Per Gallon
Iron Content Parts Per Million
*pH Taste And/Or Odor
? The model number is on the rating decal, located on
the back of the softener top covers.
4