Installation guide

WaterWorks ......... AUTOMATIC WATER CONDITIONER

PREMIER DEMAND TIMER FEATURES, SETTINGS, AND SERVICE, continued

feature / service: AUTOMATIC ELECTRONIC DIAGNOSTICS

The timer computer has a self-diagnostic function

for the electrical system (except input power and

water meter). The computer monitors the electronic

components and circuits for correct operation. If a

malfunction occurs, an error code appears in the

timer display.

The following chart shows the error codes that could

appear, and possible defects for each code. While

an error code is displayed, the TOUCH/HOLD and

DATA buttons remain operable so you can perform

the Manual Initiated Electronics Diagnostic.

ERROR CODE DISPLAYED

Err 01 I Err 03 I Err 04 Err 05

i I

POSSIBLE , motor inoperative $ wiring harness, or connection to switch $ position t timer (PWA)

DEFECT switch $ valve defect causing high torque

TO REMOVE AN ERROR CODE: (1) unplug transformer (2) correct defect (3) plug transformer in (4) Wait for at least 6 min-

utes. The error code will return if the reason for the error code was not corrected.

service: TIMER / SOFTENER, SERVICE CHECKOUT PROCEDURE

If you are not getting soft water, and an error code

is not displayed, use the procedures below to find

the problem. First, make the following visual checks.

VISUAL CHECKS: (1) Is there electrical power to

the outlet the softener transformer is plugged into?

(2) Is there salt in the storage tank? (3) Is the plumb-

ing bypass valve(s) directing water for soft water

service.., see pages 6 and 8? (4) Is the valve drain

hose open to the drain, not elevated too high, and

unobstructed?

If you do not find a problem with the visual checks,

continue with the following chart.

T,MERSROWEWRO.GT'MEI [E,octdca,powerwaso..e-] I,nvss, gotereasonforpower

AND DAY,AND/OR IS FLASHINGi'_ set the correct time of day.. _ loss. Besure outlet for softener

' = " I cannot be switched off.

TIMER DISPLAY BLANK

Checkelectricalpowertotim- I _[_'INO POWEI_NREEEPAIERD AS ]

er (outlet, transformer, power _ '

cable, all connections. J [_,_ p OWE R OKAY_ 1TIEME_TIVE ]

l TIjMERNDIDS_AL'_,YASNHOIW8 TOEOARDFyECT J_.-_ DO manual 1

diagnosticsJ

Do manual diag-

nostics to verify

proper function.

continued