Installation Guide Sink MixerFWKO3SN hn WATER WARE Mixer Body Dress Ring O-Ring — Mixer Tail Rubber Washer => Metal Washer > Lock Nut = Screw i= Blue Marked Hose Red Marked Hose Cut a 35mm hole in diameter and ensure there are 60mm circle space for mounting. 260 235, i=) Underneath the Mounting hole, screw down the Lock re preterits tail, feed the Metal washer then Rubber washer from the upside onto the Mixer Tail. Feed hoses through the t mixer tall and then both = mixer tall & hoses through the hole.
