Installation & Assembly

4”
RECOMMENDED HOLE SIZE 1-3/8”
SINK OR MOUNTING SURFACE
4”
8”
1.
FAUCET HOLE PLACEMENT
NOT TO SCALE
Recommended deck hole 1-3/8”. Drill holes for bridge faucet in mounting surface 8” on center.
OPTIONAL SIDE SPRAY: We recommend installing the side spray hole a minimum of 4-3/4” away
from nearest mounting hole of faucet.
1 2 3 4
Turn o water supply. Observe all local
plumbing codes.
Inspect waste and water
supplies for signs of damage.
Replace as necessary.
DO NOT use petroleum
based products on this
faucet.
REQUIRED TOOLS: PARTS INCLUDED:
2. Phillips Screwdriver1. Adjustable Wrench
BEFORE YOU BEGIN YOUR INSTALLATION:
INSTALLATION GUIDE
HK-USM1250
UNDERSINK MOUNTING HARDWARE (1-1/4”)