Installation Guide

CLEAR VINYL
TRIM GASKET
UNDERCOUNTER WASHER
"STAR" LOCK WASHER
LOCK NUT
1/4" FERRULE
COMPRESSION NUT
1/2" dia hole
Counter/sink top
ESCUTCHEON
SHANK
Faucet to Counter assembly:
1. Install escutcheon and clear vinyl
washer onto faucet shank.
2. Insert faucet through hole in
counter.
3. Install large steel washer and
locknut onto shank under counter.
4. Tighten faucet onto counter with
locknut.
Supply tube to Faucet assembly:
1. Slide compression nut over end of
supply tube.
2. Slide ferrule onto end of supply
tube, long tapered end first, until
1/4" of tubing extends beyond the
end of the ferrule.
3. Insert extended portion of tubing
into end of shank and tighten
compression nut by hand, then
tighten an additional 1/4" to 1/2"
turn with a wrench.
INSTALLATION INSTRUCTIONS
800, 900, 1100, 1200, 1400 series
Cold only Faucets