User guide

[ Care and Use ManUal ]
MassPREP Oligonucleotide Separation Technology Standard 3
Figure 1: ACQUITY UPLC analysis of MassPREP OST standard on an
ACQUITY UPLC OST C18, 1.7 µm column. The main components are
labeled. Small peaks eluting between labeled oligonucleotides are N-1,
N-2, etc. failure sequences generated during the oligonucleotide syn-
theses. The ACQUITY UPLC system is equipped with 50 µL standard
mixer and PDA detector (260 nm).
IV. storage and stabIlIty
It is recommended that the MassPREP OST Standard remain in
the foil pouch (in the dark) at room temperature until use. Once
reconstituted in appropriate solvents, the MassPREP OST Standard
solution is stable for one week when stored at 4 ˚C. Stability can be
extended by freezing samples at -20 ˚C.
V. orderIng InformatIon
* For use on Waters ACQUITY UPLC Systems
† MSDS information: Waters MassPREP OST Standard contains a non
hazardous peptide in powder form. It is for laboratory use only; solely
for purposes of scientic experimentation, analysis, research or develop-
ment. It should be used only as directed and in accordance with good
laboratory practice. It is non hazardous as dened by OSHA’s Hazard
Communication Standard, 29 CFR 1910.1200(c) and Appendix A and B,
and are thus exempt from the requirements of the Hazard Communica-
tion Standard, including the requirement to supply MSDSs.
0 minutes 10
15 nt
20 nt
25 nt
30 nt
35 nt
Description Particle
Size
Pore
Size
Dimension Part No.
ACQUITY UPLC
OST C18 *
1.7 μm 135 Å 2.1 x 50 mm 186003949
ACQUITY UPLC
OST C18 *
1.7 μm 135 Å 2.1 x 100 mm 186003950
Custom
ACQUITY UPLC
OST C18 *
-- -- -- 186003951
XBridge OST
C18
2.5 μm 135 Å 2.1 x 50 mm 186003952
XBridge OST
C18
2.5 μm 135 Å 4.6 x 50 mm 186003953
XBridge OST
C18
2.5 μm 135 Å 10 x 50 mm 186003954
Custom XBridge
OST C18
-- -- -- 186003955
MassPREP OST
Standard
1 Vial 186004135