Specifications

Waters Network Systems User’s Manual Page 10
PSX/ES1008 Models
4.1 DIP-Switch Setup
The DIP-switch is used to configure the modes for VLAN and duplex modes. DIP
switch settings are described in the following table.
No. Function Description
ON: Enable the VLAN function on each port 1 VLAN
OFF: Disable the VLAN function on each port
HDX: Half Duplex 2 Fiber Port Full/Half Duplex
FDX: Full Duplex
Table 4-1
Figure 4-1 DIP Switch
DIP
-
switch
LEDs