2 OPERATING MANUAL PSL1008 and ES1008 Switch Switch with Eight 10/100Base-TX Ports Plus One Fiber 100Base-FX Port PSL1008-TX PSL1008-MSC PSL1008-MST PSL1008-MTRJ PSL1008-SSC-30 ES1008-TX ES1008-MSC ES1008-MST ES1008-MTRJ ES1008-SSC-30 CORPORATE HEADQUATERS MANUFACTURING/CUSTOMER SERVICE 5001 American Blvd. W., Suite 605 945 37 Avenue, NW Bloomington, MN 55437 Rochester, MN 55901 Phone: 800.441.5319 Phone: 800.328.2275 Phone: 952.831.5603 Phone: 507.252.1951 Fax: 952.831.5605 Fax: th 507.
Table of Contents 1.0 Specifications ......................................................................................... 3 2.0 Package Contents .................................................................................. 5 3.0 Introduction ............................................................................................ 5 3.1 Hardware Features................................................................................... 6 3.2 Hardware Description ........................
1.0 Specifications OPERATIONAL CHARACTERISTICS: MAC Address Table: 2k Switching Mode: Store-and-forward Memory Buffer Size: 768kb Performance: Non-blocking wire speed Dip switch for full and half duplex setting Dip switch for VLAN setting on fiber models NETWORK STANDARDS: IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.
MECHANICAL: Enclosure: Rugged high-strength sheet metal suitable for stand-alone, wall or tabletop mounting Cooling Method: Convection cooled PHYSICAL CHARACTERISTICS: PSL1008 Dimensions: 9.75 x 5.25 x 1.5 in (165 x 92 x 25mm) Weight: 2 lb (.91kg) ES1008 Dimensions: 16 x 11 x 1.75 in (406 x 279 x 37.5mm) Weight: 3.7 lb (1.
2.0 Package Contents Examine the shipping container for obvious damage prior to installing this product. Notify the carrier of any damage that you believe occurred during shipment. Ensure that the items listed below are included. If an item is missing, please contact your supplier. The 1008 switch package contains the following: 1008 Switch Power Cord Four Rubber Feet User’s Guide 3.0 Introduction In our modern society, communication and sharing information is essential to our lives.
while simultaneously providing the 100Mbps bandwidth required for multimedia applications. All RJ45 ports support Auto MDI/MDIX. Ethernet switching technology dramatically boosted the total bandwidth of a network, eliminated congestion problems inherent with the carrier sense multiple access with the collision detection (CSMA/CD) protocol and greatly reduced unnecessary transmissions. This revolutionized networking.
3.2 Hardware Description Front Panel The Front Panel of the fiber 1008 switch consists of 8 auto-sensing 10/100Mbps RJ45 ports and one 100-BaseFX fiber. The LED indicators are also located on the front panel of the switch. Figure 3-2 PSX-1008-MSC Switch The front panel is displayed as below. Figure 3-3. Front Panel of the PSX-1008-MSC Switch Rear Panel A three-pronged AC power plug is located on the rear panel of the switch. The 1008 switches work in the range 100-240V AC, 50-60Hz.
The following table describes the function of the LED indicators: Ethernet Port LED Satus Color Description Power On Green Power On On Green The port is connecting with the device Blinks Green Off . On Orange Blinks Orange LNK/ ACT FDX/ COL The port is receiving or transmitting data. No device attached The port is operating in full-duplex mode. Collision of packets occurs in the port. No device attached or in half-duplex Off mode. Table 3-1. LED Description 3.
3.42 Power On Connect the power cord to the AC power socket on the rear panel of the switch. Check the power indicator on the front panel to see if power is properly supplied. 4.0 Network Applications This section provides samples of network topology in which the 1008 switch can be used. The 1008 series of switches are generally used as a desktop, workgroup or edge segment switch. Desktop Application The 1008 series of switches provide the ideal solution for small workgroups.
4.1 DIP-Switch Setup The DIP-switch is used to configure the modes for VLAN and duplex modes. DIP switch settings are described in the following table. No.
Segment Application For large networks with large data packets that are constantly processed, the 1008 switch is suitable for connection to the LAN backbone. The 1008 switch can be directly connected to PCs, workstations, and servers. The switch automatically learns node addresses, which are subsequently used to filter and forward all traffic based on the destination address.
5.0 Troubleshooting All Waters’ switching products are designed to provide reliability and consistently high performance in all network environments. The installation of Waters’ 1008 switch is a straightforward procedure (See Sections 3-4). Should problems develop during installation or operation, this section is intended to help locate, identify and correct these types of problems. Please follow the suggestions listed below prior to contacting your supplier.
a. The nature and duration of the problem b. Situations when the problem occurs c. The components involved in the problem d. Any particular application that, when used, appears to create the problem 2. An accurate list of Waters Network Systems product model(s) involved. Include the date(s) that you purchased the products from your supplier. 3.
5.3 Shipping and Packaging Information Should you need to ship the unit back to Waters Network Systems, please follow these instructions: Package the unit carefully. original container if available. It is recommended that you use the Units should be wrapped in a "bubble-wrap" plastic sheet or bag for shipping protection. (You may retain all connectors and this Installation Guide.) packing material.
6.0 Warranty Waters Network Systems’ Warranty Statement Waters Network Systems’ products are warranted against defects in materials and workmanship. The warranty period for each product will be provided upon request at the time of purchase. Unless otherwise stated, the warranty period is for the useable life of the product.
Note: Warranty period for any and all external power supplies is one (1) year from date of purchase. EXCEPT FOR THE EXPRESS WARRANTY SET FORTH ABOVE, WATERS NETWORK SYSTEMS GRANTS NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, BY STATUTE OR OTHERWISE, REGARDING THE PRODUCTS, THEIR FITNESS FOR ANY PURPOSE, THEIR QUALITY, THEIR MERCHANTABILITY, OR OTHERWISE. WATERS NETWORK SYSTEMS’ LIABILITY UNDER THE WARRANTY SHALL BE LIMITED TO PRODUCT REPAIR, OR REPLACEMENT OF THE BUYER’S PURCHASE PRICE.
