Specifications

Waters Network Systems User’s Manual Page 96
PS-2126M-POE
Rate:
Set the limit of Egress bandwidth for the chosen port. Packet transmission will be delayed if
the rate exceeds the value you set in the Data Rate field. Traffic may be lost if the egress
buffers run full. The format of the packets is limited to unicast, broadcast and multicast. Valid
value of Ports 1~24 ranges from 66~102400 and for Ports 25~26 ranges from 66~1024000 with
the minimum unit of 1. The default value of Port 1~24 is 102400 and Port 25~26 is 1024000.
Figure 5.62 – Egress Bandwidth Control
Function name:
Storm Setting
Function description:
The Bandwidth Management function is used to set up the limit of Ingress and Egress bandwidth
for each port.
Parameter description:
Storm Type:
Disable:
Disables bandwidth storm control.
Broadcast Storm Control:
Enables bandwidth storm control for broadcast packets.
Multicast Storm Control:
Enables bandwidth storm control for multicast packets.
Unknown Unicast Storm Control:
Enables the function of bandwidth storm control for unknown unicast packets. These
packets are the MAC addresses that have not completed the learning process.
Broadcast, Multicast, Unknown Unicast Storm Control:
Enables the function of bandwidth storm control for all packets in transmission.