Specifications

Waters Network Systems User’s Manual Page 95
PS-2126M-POE
Figure 5.61 – Restricted Group
5.22 Bandwidth Management
Function name:
Ingress Bandwidth Setting
Function description:
The Ingress Bandwidth Setting function is used to set the limit of Ingress bandwidth for each port.
Parameter description:
Port No.:
Choose the desired port for the Ingress Bandwidth Setting. The valid range for the ports is
1~26.
Rate:
Set the limit of Ingress bandwidth for the chosen port. Incoming traffic will be discarded if the
rate exceeds the value you set in the Data Rate field. Pause frames are also generated if flow
control is enabled. The format of the packets is limited to unicast, broadcast and multicast. The
valid value of Ports 1~24 ranges from 66~102400 and for Ports 25~26, the range is from
66~1024000 with the minimum unit of 1. The default value of Port 1~24 is 102400 and Port
25~26 is 1024000.
Function name:
Egress Bandwidth Setting
Function description:
The Egress Bandwidth Setting function is used to set the limit of Egress bandwidth for each port.
Parameter description:
Port No.:
Choose the desired port for the Egress Bandwidth Setting. The valid range for the ports is 1~26.