Specifications

Waters Network Systems User’s Manual Page 77
PS-2126M-POE
MAC Address:
Displays the MAC Address of a system ID.
Port:
Displays the port number of an LACP port ID.
Key:
Displays the key value of the aggregator. The key value is determined by the LACP protocol
entity and can’t be set through management.
Trunk Status:
Displays the trunk status of a single member port.”---“ means “not ready”
Figure 5.42 – Aggregator 3 Information
Function name:
LACP System Configuration
Function description:
Used to set the priority of the LACP system ID. LACP will only aggregate together the ports whose
peer link partners are all on a single system. Each system supports LACP will be assigned a globally
unique System Identifier for this purpose. A system ID is a 64-bit field comprising a 48-bit MAC
Address and 16-bit priority value.
Parameter description:
System Priority:
The System Priority can be set by the user. Its range is from 1 to 65535. Default: 32768
Hash Method:
DA+SA, DA and SA are three hash methods offered for the Link Aggregation of the switch. Packets
will decide the path to transmit according to the mode of hash that has been chosen.
Default: DA and SA