Specifications

Waters Network Systems User’s Manual Page 75
PS-2126M-POE
Group:
Ports choosing the same trunking method other than “None” must be assigned a unique Group
number (i.e. Group ID, valid value is from 1 to eight) so they can aggregate with each other.
Active LACP:
This field is only available when a port’s trunking method is LACP.
Active:
An Active LACP port begins to send LACPDU to its link partner as soon as the LACP
protocol entity takes control of this port.
Passive:
A Passive LACP port will not actively send LACPDU out until it receives an LACPDU from
its link partner.
Aggtr:
Aggtr is an abbreviation of “aggregator”. Every port is also an aggregator, and its own
aggregator ID is the same as its own port number. An aggregator is a representative of a
trunking group. Ports with same Group ID and using same trunking method will have the
opportunity to aggregate to a particular aggregator port. This aggregator port is usually the port
with the smallest port number within the trunking group.
Status:
This field represents the trunking status of a port which uses a trunking method other than
“None”. It also represents the management link status of a port which uses the “None” trunking
method. “---“ means “not ready”
Figure 5.39 – Trunk Port Setting/Status