Specifications

Waters Network Systems User’s Manual Page 62
PS-2126M-POE
Parameter description:
MAC:
Six-byte Ethernet hardware address and usually expressed by hex and separated by hyphens.
For example,
00 – 40 - C7 - D6 – 00 - 01
VID:
VLAN identifier. This will be filled only when tagged VLAN is used. Valid range is 1 ~ 4094.
Queue (Priority):
Set the priority( 0~3) for the MAC.
Forwarding Rule(Drop Policy):
Static:
A MAC address is assigned to a specific port. Traffic from this MAC address will be
forwarded to this port.
Static with Destination Drop:
If the DA of the incoming packets meets the value you set, these packets will be dropped.
Static with Source Drop:
If the SA of the incoming packets meets the value you set, these packets will be dropped.
Port :
Select the port number to set in the switch (ports 1 ~26).
Function name:
MAC Alias
Function description:
MAC Alias function is used to assign MAC address an English name. This will help identify which
MAC address belongs to a user in the illegal access report. At the initial time, all pairs of the existing
alias name and MAC address are shown.
There are three MAC alias functions in this function folder, including MAC Alias Add, MAC Alias Edit
and MAC Alias Delete. Use Create/Edit to add/modify a new or an existing alias name for a
specified MAC address, or mark an existing entry for deletion. Alias name must be composed of A-Z,
a-z and 0-9 only and has a maximal length of 15 characters.
Function name:
MAC Alias Create/Edit or Delete
Function description:
In the MAC Alias function, MAC Alias Add/Edit function is used to let you add or modify an
association between MAC address and an English name. Select Create/Edit to add a new record
with name.
Select the MAC Alias Delete function to remove an alias name from a MAC address. You can select
an existing MAC address or alias name for removal.