Specifications
Waters Network Systems User’s Manual Page 61
PS-2126M-POE
Learning Limit:
Set up the maximum amount of MAC addresses that each port can learn. Valid value of learning
limit for ports 1~24 ranges from 0-8191. For ports 25 and port 26, only the fixed value 8192 is
assigned to these two ports and you cannot configure this value.
Figure 5.30 – MAC Maintenance
Function Name:
Function Name:
Static Setting
Function Description:
The static function is used to configure MAC’s real attributes inside of the switch. The three attributes
that can be configured are: static, static with destination drop and static with source drop.
If static is chosen, assign a MAC address to a specific port. All traffic from this MAC address will be
forwarded to this port.
If static with destination drop is chosen, the packet will be dropped if its DA is equal to the value
you have set. This setting is global, so, it may affect all ports’ transmission of the packets.
If static with source drop is chosen, the packet will be dropped if its SA is equal to the value you
set. This setting is global so, it may affect all ports’ transmission of the packets.
Figure 5.31 – Static MAC Settings