Specifications

Waters Network Systems User’s Manual Page 56
PS-2126M-POE
Edit a group:
Select a group entry and select Edit. This allows you to modify the group’s description,
member and untagged settings.
5.13.3 PVID
Function name:
PVID
Function description:
In the PVID Setting, you can input a range of VID numbers (1 to 4094) to each port. You can
choose ingress filtering rule 2 to each port. The Ingress Filtering Rule 2 is drop untagged frames. If
Rule 2 is enabled, the port will discard all Untagged-frames.
Figure 5.25 – PVID Settings
Parameter description:
Port 1-26:
Port number.
PVID:
The PVID range is 1-4094. Before setting the PVID, you have to create a Tag-based VLAN with
VID x. For example, if port x receives an untagged packet, the switch will apply the PVID
(assume as VID y) of port x to tag this packet. The packet then will be forwarded as the tagged
packet with VID y.
Default Priority:
It is based on 802.1p QoS and affects untagged packets. When the packets enter the switch,
priority precedence will be applied according to your default priority setting and mapping to
802.1p priority setting in the QoS function. For example, if you set default priority for port 2 with
2 and transmit untagged packets to port 2, these packets will own priority 2 precedence based
on your default 802.1p priority mapping setting in the QoS function and will be sent to Queue 1.