Specifications

Waters Network Systems User’s Manual Page 33
PS-2126M-POE
who are unable to connect to the switch (Deny). Some restrictions also can be placed on the mode
used to connect to the switch. For example, VLAN VID is able to be accepted or denied by the
switch, the IP range of the user could be accepted or denied by the switch, a user port can be
allowed or not allowed to connect with the switch, or the way the switch is controlled when
connected by via HTTP, Telnet or SNMP.
Figure 5.7 - Security
Parameter description:
Name:
A name is composed of any letter (A-Z, a-z) and digit (0-9) with maximal 8 characters.
VID:
The switch supports two options for managed valid VLAN VID, including “Any” and Custom.
Default is Any. Custom allows you to supply the VID number. The valid VID range is 1~4094.
IP Range:
The switch supports two options for managed valid IP Range, including Any and Custom. The
Default is Any. Custom allows you to assign an effective IP range. The valid range is
0.0.0.0~255.255.255.255.
Incoming Port:
The switch supports two options for managed valid Port Range, including Any and Custom.
The default is Any. Custom allows you to select the ports that should be used and the ports
that should be restricted in the management security configuration.
Access Type:
The switch supports two options
for managed valid Access Type, including Any and Custom. The
default is Any. HTTP, Telnet and SNMP If Custom has been chosen, HTTP, Telnet and
SNMP can be used to access and managing the switch.
Action:
The switch supports options
for managed valid Action Type, including Deny and Accept. The
default is Deny. Deny restricts access switch management. Accept provides the authority to
manage the switch.
Edit/Create:
A new entry of Management Security Configuration can be created after the initial parameters