Specifications

Waters Network Systems User’s Manual Page 30
PS-2126M-POE
over the ending time, the system time will be decreased one hour after one minute at the time
since it passed over.
The switch supports valid configurable day light saving time is –5 ~ +5 step one hour. The zero
for this parameter means it need not have to adjust the current time, equivalent to in-act
daylight saving. You don’t have to set the starting/ending date as well. If you set daylight saving
to non-zero, you have to set the starting/ending dates as well; otherwise, the daylight saving
function will not be activated.
Default for Daylight Saving: 0.
The following parameters are configurable for the function Daylight Saving and described in
detail.
Day Light Saving Start :
This is used to set for the beginning of day light saving time.
Month:
Range is 1 ~ 12.
Default: 1
Day:
Range is 1 ~ 31.
Default: 1
Hour:
Range is 0 ~ 23.
Default: 0
Day Light Saving End :
This is used for the ending of daylight saving time.
Month:
Range is 1 ~ 12.
Default: 1
Day:
Range is 1 ~ 31.
Default: 1
Hour:
Range is 0 ~ 23.
Default: 0