Specifications

Waters Network Systems User’s Manual Page 16

PS-2126M-POE

4.3 Configuring the Switch via the Web

You can configure and monitor the switch through:

 CLI

 Web browser

 SNMP manager. The user interface for SNMP is not covered at this time.

Before you are able to communicate with the switch, you must know the IP address of the

switch. Once you know the IP address, follow these instructions:

1. Connect the switch with a UTP cable to your workstations.

Note: If the workstation connects to the switch, you will have to setup the same subnet

mask between them.

2. Access your web browser or use the console connection.

Note: If you make changes to the configuration, you must save the configuration before

rebooting the switch.

Assign an IP address,

For example:

IP = 192.168.1.100

Subnet Mask = 255.255.255.0

Default Gateway

192.168.

254

ure 4.2

–

Front Switch Vie

Ethernet LAN