Specifications

Waters Network Systems User’s Manual Page 15
PS-2126M-POE
1. Once you have logged into the switch, you will see the following screen.
Figure 4.1 – Login Screen
2. To set the IP Address of the switch, use the following commands:
Syntax:
set ip <ip> <mask> <gateway>
Description:
To set the system IP address, subnet mask and gateway.
Argument:
<ip> : ip address
<mask> : subnet mask
<gateway> : default gateway
Possible value:
<ip> : 192.168.1.2 or others
<mask> : 255.255.255.0 or others
<gateway> : 192.168.1.253 or others
Example:
FEPoEL2-SW26# set ip 192.168.1.2 255.255.255.0 192.168.1.253
Note: Once you have set the IP address of the switch, you must save the configuration. The
CLI command is: save start. A detailed list of CLI commands can be found in Section 6.0.