Specifications

Waters Network Systems User’s Manual Page 131
PS-2126M-POE
Command Syntax Description Argument Possible
Value
to active mode;
passive: set the
LACP to passive
mode
Show aggtr-
view
show aggtr-
view
Used to display the aggregator
list
None None
Show lacp-
detail
show lacp-
detail <aggtr>
Used to display the detailed
information of the LACP trunk
group
<aggtr>: aggregator,
available from 1 to 12
<aggtr>: 1 to
12
Show lacp-
priority
show lacp-
priority
Used to display the value of
LACP priority
None None
Show status show status Used to display the aggregator
status and the settings of each
port
None None
VLAN
Del port-group del port-group
<name>
Used to delete the port-based
VLAN group
<name>: VLAN group
to be deleted
<name>: port-
VLAN name
Del tag-group del tag-group Used to delete the tag-based
VLAN group
<vid>: VLAN group to
be deleted
<vid>: 1 to
4094
Disable drop-
untag
disable drop-
untag <range>
Used to set untagged frames to
not be dropped
<range>: ports to be
set, syntax 1, 5-7,
available 1 to 12
<range>: 1 to
12
Disable sym-
vlan
disable sym-
vlan
Used to drop frames from the
non-member port
<range>: ports to be
set, syntax 1, 5-7,
available 1 to 12
<range>: 1 to
12
Enable drop-
untag
enable drop-
untag <range>
Used to drop the untagged
frames
<range>: ports to be
set, syntax 1, 5-7,
available 1 to 12
<range>: 1 to
12
Enable sym-
vlan
enable sym-
vlan <range>
Used to drop frames from the
non-member port
<range>: ports to be
set, syntax 1, 5-7,
available 1 to 12
<range>: 1 to
12
Set mode set mode
<disable|
port|tag|metro|
double-tag>
[up-link]
Used to switch LVAN mode,
including disable, port-based,
tag-based, metro and double-
tag modes
<disable>: vlan
disable
<tag>: set tag-based
vlan
<port>: set port-
based vlan
<metro>: set metro
mode vlan
<double-tag>: enable
Q-in-Q function
<up-link>: syntax 1,
5-7, available from 11
to 12, only for metro
mode vlan
<disable|port|
tag|metro|
double-tag>:
disable, port,
tag, metro,
double-tag
[up-link] 11 or
12
Set port-group set port-group
<name>
<range>
Used to add or edit a port-
based VLAN group
<name>: port-vlan
name
<range>: syntax 1, 5-
7, available from 1 to
12
<range>: 1 to
12
Set port-role set port-role Used to set the egress rule. <range>: ports to be <range>: 1 to