Specifications

Waters Network Systems User’s Manual Page 126
PS-2126M-POE
Command Syntax Description Argument Possible
Value
Enable flow-
control
enable flow-
control <range>
Used to enable the flow control
function of the port
<range>:syntax 1, 5-
7, available from 1 to
12
<range>: 1~12
Enable state enable state
<range>
Used to enable the
communication capability of the
port
<range>:syntax 1, 5-
7, available from 1 to
12
<range>: 1~12
Set speed-
duplex
set speed-
duplex <range>
<auto|10half|10
full|100half|100
full|1gfull>
Used to set the speed and
duplex mode of all ports
<range>:syntax 1, 5-
7, available from 1 to
12
<port-speed>: auto:
set auto-negotiation
mode
10half: set
speed/duplex 10M
Half
10full: set
speed/duplex 10M
Full
100half:set
speed/duplex 100M
half
100full: set
speed/duplex 100M
full
1Gfull: set
speed/duplex 1G full
<range>: 1 to
12
<port-speed>:
auto, 10half,
10full, 100half,
100full, 1Gfull
Show conf show conf Used to display each port’s
configuration regarding state,
speed-duplex and flow control
None None
Show detail-
counter
show detail-
counter <#>
Used to display the detailed
counter number for port traffic
<#>: port, available
from 1 to 12
<#>: 1~12
Show sfp show sfp
<port>
Used to display the SFP
module information
<port>: SFP port,
available 11-12
<port>: 11, 12
Show simple-
counter
show simple-
counter
Used to display the summary
counter for each port’s traffic
None None
Show status show status Used to display the port’s
current status
None None
QoS
Set advance-
layer4
set advance-
layer4 <port-
range> <#>
<tcp/udp port>
<default>
<match>
Used to set class of ports on
advanced mode for Layer 4
QoS
<port-range>:port
range, syntax 1, 5-7,
available from 1 to 12
<#>: special
UDP/TCP port
selection, range: 1-10
<tcp/udp port range>:
0-65535
<default>: default
class (all other
TCP/UDP ports)
1:high, 0:low
<match>:special
<port –range>:
1 to 12
<#>: 1-10
<tcp/udp port
range>:0-
65535
<default>: 1 or
0
<match>: 1 or 0