Specifications

Waters Network Systems User’s Manual Page 122
PS-2126M-POE
Command Syntax Description Argument Possible
Value
Show config show config To display the GVRP
configuration
None None
Show counter show counter Used to display the counter
number of the port
<port>: port number <port>:
available from
1 to 8
Show group show group Used to display the GVRP
groups
None None
Hostname
Hostname hostname
<name>
Used to set the hostname of the
switch
<name>:hostname,
max 40 characters
<name>:hostna
me, max 40
characters
IGMP
Set igmp_
snooping
set
igmp_snooping
<status>
Use to set the most for IGMP
snooping
<status>:0:disable
1:active
2:passive
<status>: 0, 1
or 2
Show show Used to display IGMP snooping
mode and IP multicast table
None None
IP
Disable DHCP disable dhcp Used to disable the DHCP
function
None None
Enable DHCP enable dhcp Used to enable the DHCP
function and set DNS server for
manual or auto mode
<manual|auto>:set
DHCP with either
manual or auto mode
<manual|auto>:
manual or auto
Set DNS set dns Used to set the IP address of
the DNS server
<ip>:dns ip address 168.95.1.1
Set IP set <ip>
<mask>
<gateway>
Used to set the system IP
address, subnet mask and
gateway
<ip>:ip address
<mask>:subnet mask
<gateway>:default
gateway
<ip>:192.168.1.
2 or others
<mask>:255.25
5.255.0 or
others
<gateway>:192
.168.1.253 or
others
Show show Used to display the system’s
DHCP state, IP address, subnet
mask, default gateway, DNS
mode, DNS server IP address
and current IP address
None None
Log
Clear clear Used to clear the log data None None
Disable auto-
upload
disable auto-
upload
Used to disable the auto-upload
function
None None
Enable auto-
upload
enable auto-
upload
Used to enable the auto-upload
function
None None
Show show Used to display a list of the trap
log events. When a log event
occurs, it is recorded. Show is
used to query the log functions.
Up to 120 records are
supported.
None None
Upload upload Used to upload log data through None None