Specifications

Waters Network Systems User’s Manual Page 115
PS-2126M-POE
The following table lists the CLI commands and descriptions.
Command Syntax Description Argument Possible
Value
Global Commands
End end Return to top mode None None
Exit exit Returns to previous mode None None
Help help Displays available commands.
When you use help, all
commands are displayed. This
command will help you
distinguish between local and
global commands.
None None
History history Displays the list of commands
you have been using during the
session. CLI supports up to
256 records. If no argument is
entered, CLI will list total
records up to 256. If an
argument is provided, CLI
would display the number of
records equal to the argument.
Optional (Show last
number of history
records)
1, 2, 3....256
Logout logout If you use this command via
Telnet connection, you will
logout and disconnect. If you
used this command through
direct console connection, you
will be logged out of the system
and return to the login prompt.
None None
Restore
Default
restore default Use this command to restore
the startup configuration
provided by factory default. If
the restore is successful, you
will be prompted to reboot.
Once rebooted, startup
configuration will be reset to
factory default.
None None
Restore user restore user Restores startup configuration
as defined by user
configuration. If restoring is
successful, you will be
prompted to reboot. After
restoring the user defined
configuration, all changes in the
startup configuration would be
lost. After rebooting, the entire
startup configuration will
replace the user defined
configuration.
None None
Save Start save start Use this command to save the
current configuration as the
startup configuration. This
command must be used in
None None