Specifications

Waters Network Systems User’s Manual Page 111
PS-2126M-POE
5.28 Reboot
There are a few ways to reboot the switch, including power up, hardware reset and software
reset. You can press the RESET button in the front panel to reset the switch. After upgrading
software, changing IP configuration or modifying VLAN configurations, you must reboot in order
for the new configuration to take effect.
Function name:
Reboot
Function description:
Reboot the switch. Reboot takes the same effect as the RESET button on the front panel of the
switch. It will take around thirty (30) seconds to complete the system boot.
Parameter description:
Save and Reboot:
Save the current settings as start configuration before rebooting the switch.
Reboot:
Reboot the system directly.
Figure 5.78 - Reboot
5.29 Logout
You can manually logout by using Logout function. You can also configure the switch to logout
automatically.
Function name:
Logout
Function description:
The switch provides and automatic logout to prevent unauthorized users from using the system. If
you do not logout and exit the browser, the switch will automatically logout. You can use Auto
Logout.