Specifications

LAN Configuration

ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308

 To edit a VLAN profile:

1. On the LAN Setup screen for IPv4 (see Figure 51 on page 88), click the Edit button in

the Action column for the VLAN profile that you want to modify. The Edit VLAN Profile

screen displays. This screen is identical to the

Add VLAN Profile screen (see Figure 52

on page 89).

2. Modify the settings as described in the previous table.

3. Click Apply to save your settings.

 To enable, disable, or delete one or more VLAN profiles:

1. On the LAN Setup screen for IPv4 (see Figure 51 on page 88), select the check box to

the left of each VLAN profile that you want to enable, disable, or delete, or click the

Select All table button to select all profiles. (You cannot select the default VLAN profile.)

2. Click one of the following table buttons:

• Enable

. Enables the VLAN or VLANs. The ! status icon changes from a gray circle to

a green circle, indicating that the selected VLAN or VLANs are enabled. (By default,

when a VLAN is added to the table, it is automatically enabled.)

• Disable

. Disables the VLAN or VLANs. The ! status icon changes from a green circle

to a gray circle, indicating that the selected VLAN or VLANs are disabled.

• Delete.

Deletes the VLAN or VLANs.

Configure VLAN MAC Addresses and LAN Advanced

Settings

By default, all configured VLAN profiles share the same single MAC address as the LAN

ports. (All LAN ports share the same MAC address.) However, you can change the VLAN

MAC settings to allow up to 16 VLANs to each be assigned a unique MAC address.

You can also enable or disable the broadcast of Address Resolution Protocol (ARP) packets

for the default VLAN. If the broadcast of ARP packets is enabled, IP addresses can be

mapped to physical addresses (that is, MAC addresses).

 To configure a VLAN to have a unique MAC address:

1. Select Network Configuration > LAN Settings. In the upper right of the screen, the

IPv4 radio button is selected by default. The LAN submenu tabs display

, with the LAN

Setup screen in view, displaying the IPv4 settings (see Figure 51 on page 88).

2. Click the Advanced option arrow in the upper middle of the LAN Setup screen. The IPv4

LAN Advanced

screen displays: