Specifications

LAN Configuration

ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308

firewall’s LAN IP address). When the DNS proxy option is disabled for a VLAN, all DHCP

clients receive the DNS IP addresses of the ISP but without the DNS proxy IP address.

LDAP Server

A Lightweight Directory Access Protocol (LDAP) server allows a user to query and modify

directory services that run over TCP/IP. For example, clients can query email addresses,

contact information, and other service information using an LDAP server. For each VLAN,

you can specify an LDAP server and a search base that defines the location in the directory

(that is, the directory tree) from which the LDAP search begins.

Configure a VLAN Profile

For each VLAN on the VPN firewall, you can configure its profile, port membership, LAN

TCP/IP settings, DHCP options, DNS server, and inter-VLAN routing capability.

 To add a VLAN profile:

1. Select Network Configuration > LAN Settings. In the upper right of the screen, the

IPv4 radio button is selected by default. The LAN submenu tabs display

, with the LAN

Setup screen in view, displaying the IPv4 settings. (The following figure contains some

VLAN profiles as an example.)

Note: For information about how to manage VLANs, see Port-Based

VLANs on page 85. The following information describes how to

configure a VLAN profile.

Figure 51.

2. Click the Add table button under the VLAN Profiles table. The Add VLAN Profile screen

displays: