Specifications

IPv4 and IPv6 Internet and WAN Settings

ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308

4. Click Apply to save your settings. The profile is added to the List of QoS Profiles table on

the QoS screen.

 To add a priority queue QoS profile:

1. Select Network Configuration > QoS. The QoS

screen displays.

2. Under the List of QoS Profiles table, click the Add table button. The

Add QoS screen

displays. The following figure shows settings for a priority QoS profile:

Figure 49.

3. Enter the settings as described in the following table:

Inbound Maximum

Bandwidth

Enter the inbound maximum bandwidth in Kbps that is allocated to the host.

Diffserv QoS Remark Enter a DSCP value in the range of 0 through 63. Packets are marked with this

value. Leave this field blank to disable packet marking.

Table 15. Add QoS screen settings for a priority profile

Setting Description

QoS Type Priority (for Rate Control, see Figure 48 on page 78 and Table 14 on page 78).

Interface From the drop-down list, select one of the WAN interfaces.

Table 14. Add QoS screen settings for a rate control profile (continued)

Setting Description