Specifications

IPv4 and IPv6 Internet and WAN Settings

ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308

After you have configured your account information on the VPN firewall, when your

ISP-assigned IP address changes, your VPN firewall automatically contacts your DDNS

service provider, logs in to your account, and registers your new IP address. Consider the

following:

• For auto-rollover mode, you need a fully qualified domain name (FQDN) to implement

features such as exposed hosts and virtual private networks regardless of whether you

have a fixed or dynamic IP address.

• For load balancing mode, you might still need a fully qualified domain name (FQDN)

either for convenience or if you have a dynamic IP address.

Note: If your ISP assigns a private WAN IP address such as 192.168.x.x or

10.x.x.x, the DDNS service does not work because private

addresses are not routed on the Internet.

 To configure DDNS:

1. Select Network Configuration > Dynamic DNS. The Dynamic DNS screen displays

(see the following figure).

The W

AN Mode section on the screen reports the configured WAN mode (for example,

Single Port WAN1, Load Balancing, or

Auto Rollover). Only those options that match the

configured WAN mode are accessible on the screen.

2. Click the submenu tab for your DDNS service provider:

• Dynamic DNS for DynDNS.org (which is shown in the following figure)

• DNS TZO for TZO.com

• DNS Oray

for Oray.net

• 3322 DDNS

for 3322.org