Specifications

System Logs and Error Messages
434
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
IPSec Restart
This section describes logs that are generated when IPSec restarts.
Unicast, Multicast, and Broadcast Logs
ICMP Redirect Logs
Table 112. System logs: IPSec restart
Message Jan 23 16:20:44 [SRX5308] [wand] [IPSEC] IPSEC Restarted
Explanation Log generated when the IPSec is restarted.
This message is logged when IPSec restarts after any changes in the configuration
are applied.
Recommended action None
Table 113. System logs: unicast
Message Nov 24 11:52:55 [SRX5308] [kernel] UCAST IN=SELF OUT=WAN SRC=
192.168.10.1 DST=192.168.10.10 PROTO=UDP SPT=800 DPT=2049
Explanation • This packet (unicast) is sent to the device from the WAN network.
• For other settings, see Table 106 on page 431.
Recommended action None
Table 114. System logs: unicast, redirect
Message Feb 2007 22 14:36:07 [SRX5308] [kernel] [LOG_PACKET] SRC=192.168.1.49
DST=192.168.1.124 PROTO=ICMP TYPE=5 CODE=1
Explanation • This packet is an ICMP redirect message sent to the device by another device.
• For other settings, see Table 106 on page 431.
Recommended action To enable these logs, from the CLI command prompt of the VPN firewall, enter this
command:
monitor/firewallLogs/logger/loggerConfig logIcmpRedirect 1
And to disable it enter:
monitor/firewallLogs/logger/loggerConfig logIcmpRedirect 0